|
|
Post by curtis on Oct 19, 2011 4:11:45 GMT -5
We came up with 1/8 stud protrusion at build and allowing a max of 3/16 protrusion measured at the end of the features. Morgan Elis is going to be the designated tire inspector. And if your going to run them you will be in the studded X class. With hopes that everything develops nice so we can accept them in ever class next year.
Hupe can you put at the stud info up here please.
Start building!
|
|
|
|
Post by curtis on Oct 19, 2011 17:45:22 GMT -5
|
|
|
|
Post by Don Hupe on Oct 19, 2011 21:48:55 GMT -5
I'm currently sourcing a supplier for the weld nut but thier minumum order is in multiples of 5000, they are a ontario supplier so the shipping and such should be cheaper.
Let me know whos interested and if we get an order together in the next 2 weeks it should be here in the middle of november
|
|
|
|
Post by Don Hupe on Oct 19, 2011 21:51:01 GMT -5
here's alink to the cheater studs facebook page www.facebook.com/#!/group.php?gid=112107605491949 |
|
|
|
Post by john kelly on Oct 23, 2011 20:45:37 GMT -5
count me in for a min of 1000 units don
|
|
edf
Member
Posts: 12
|
Post by edf on Oct 25, 2011 6:36:28 GMT -5
is there now an actual Hupe stud rule? ed f
|
|
|
|
Post by Rob Nolan on Oct 25, 2011 11:56:57 GMT -5
Hey Don!
Might need to make a new group as that one looks like it will be no more soon.
|
|
|
|
Post by Don Hupe on Oct 26, 2011 15:23:19 GMT -5
just ordered 5000 - 11MM weld nuts
Johns in for 1000
who else is in
|
|
|
|
Post by curtis on Oct 26, 2011 16:35:30 GMT -5
I need enough to do 2 155's
|
|
|
|
Post by Don Hupe on Oct 26, 2011 23:32:14 GMT -5
don't worry all it will cost is money!!!!!
|
|
|
|
Post by Don Hupe on Nov 4, 2011 17:36:49 GMT -5
so far 2 people have ordered 2 sets of studs and got #12 x 24 pitch, so I've asked Francis to get back to me on which one are the M6 x 1.0 pitch, Talked to him today and he will be finding out monday and we'll get to the bottom of this and figure out which ones to order
|
|
|
|
Post by Don Hupe on Nov 16, 2011 0:16:40 GMT -5
so I finally got conformation , the studs needed are 1 1/2 inch MF1 studs, here is the information, remember I have tire sealant and weld nuts for sale now Hupes cheater tires supplies needed All this hardware is available from Fastenal in Thunder bay – ask for Casey , tell him Hupe sent you Washers and nuts M6 reg washer ¼ USS washer M6 fender washer M6 x 1.0 pitch nyloc nuts Studs are available from www.marcelfournier.caThe studs are MF1 1 ½ inchs long the thread is M6 x 1.0 pitch metric thread they can be ordered online and shipped to your house All the stuff from the states can be shipped to Your Name 9301 Ryden Road Grand Portage Minnesota 55605 Rydens phone number is 218-475-2330 Weld nuts available from McMaster Carr Order desk (404) 629 6500 Part nos 8MM 90563A620 $9.47 per hundred 11MM 90563A630 $9.73 per hundred 14MM 90563A640 $10.47 per hundred Depends on the thickness of the tire which one you need, I’ve been using 11MM and washers for extra clamping power ultraseal.com/800-346-9090 Ask for Stephanie Ultra seal $200 per jug to border I use the XHD formula If you have any questions please e-mail me donhupe@tbaytel.net |
|
|
|
Post by champ98 on Nov 20, 2011 14:19:49 GMT -5
It appears that I cannot upload an image on this forum. Strange for a forum.
Too bad as I wanted to upload an image of the tires we used to use down here in Minden, to see how they compare to your builds.
|
|
|
|
Post by Lucas Johnson on Nov 22, 2011 17:39:20 GMT -5
If you want to post an image it needs to be hosted elsewhere already and you can display it for example www.b15sentra.net/reviews/data/49/6859blizzak.jpgcan be displayed by pasting the url between the image tag, insert the link in between the img tags  to get the tags use the button in the toolbar Cheers, Lj |
|
